Fan Timer - Remote Switch - Nederman 14527837 Manual Del Usuario

EN Fan Inverter
7

Fan Timer - Remote Switch

If a Fan Timer has been installed, see figure 10, it can be set to the following
positions:
NOTE! The overtime timer can be reset by briefly turning it to 'OFF' and then
back to 'AUTO'.
NOTE! If the remote switch is not installed, the default function for the Fan
Timer is 'Auto'.
NOTE! Fan Inverter starts up automatically after an input voltage interruption
if the Fan Timer or external run command is active.
NOTE! Read section '2 Safety' before making any changes.
12
•
OFF: The Fan Timer is off.
•
AUTO: The Fan Timer starts and stops the system according to the Fan
Timer settings, see Section '7.1 Fan Timer settings'.
•
+2h: Turn the switch to '+2h' so that Fan Inverter continues to operate for
two hours from the moment '+2h' is activated.