VIOMI V2 max Manual Del Usuario página 9

Installing Accessories for Desired Mode
Cleanup mode: Install 2-in-1 dust compartment with water
reservoir.
1. Open the cover of the vacuum-mop and place 2-in-1 dust compart-
ment with water reservoir in the direction shown until it locks into
place.
2. Turn on the vacuum-mop. It is now ready to start cleaning.
Vacuuming and mopping mode: Install 2-in-1 dust
compartment with water reservoir, mop holder, and mop.
2. Install the 2-in-1 dust compartment
with water reservoir into the
vacuum-mop until it locks into place.
06
1. Open the water reservoir lid, fill
up the reservoir, then rea ach the
lid.
3. A ach the mop to the holder
and press the velcro strips firmly
together.