Solving Problems; Cleaning / Maintenance; Cleaning & Maintenance - Lacor 69372 Instrucciones De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
FAULTPHENOMENON
Push the Swith and No
feedback
Smell from the motor
running, at the first few
time use
Stop working at midway
Much fruit dreg contain in
juice
1.- Press the ON/OFF switch and unplug the product before starting to disassemble it.
2.- Turn the lid in an anti-clockwise direction and remove it by pulling up.
3.- Next, remove the pressing block, filter and juice container.
4.- Clean all the accessories with soapy water. To clean the filter and parts which are difficult to
access, use the cleaning brush (5) supplied.
5.- The main body cannot be submerged in water; only clean it with a damp cloth.
6.- Once clean, dry all the accessories before re-assembling them. Remember to always store the
product in a dry place with no humidity.
52

SOLVING PROBLEMS

FAULT ANALYSIS
1.- Check the Power cord and
confirm it is inserted
2.- Long time working, and
protected intelligently
3.- De lid is not well assembled
and the security switch is not
pressed
1.- It's common for new motor
1.- Too much food and fruit in the
feeling tube which caused
overload or block uo then
ceased
2.- Long time working, and
protected intelligently
1.- Juice net damaged

CLEANING / MAINTENANCE

FAULT ANALYSIS
1. Insert the Power cord
2. Restart after 20-30 mins
3. Assembly the lid properly
1.- Send to our maintance
point for repair if it is still
have smell
1.- Decrease adding food &
fruit and push the stick
slightly
2.- Restart after 20-3- mins
1.- Change a new juice net

Publicidad

Tabla de contenido
loading

Tabla de contenido