Axis P7216 Manual Del Usuario página 14

AXIS P7216 Video Encoder
2
DC output
3–
Configurable
6
(Input or
Output)
3.
I/O configured as input
4.
I/O configured as output
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Digital input – Connect to pin 1 to activate,
or leave floating (unconnected) to deactivate.
Digital output – Connected to pin 1 when
activated, floating (unconnected) when
deactivated. If used with an inductive load,
e.g. a relay, a diode must be connected in
parallel with the load, for protection against
voltage transients.
14
12 V DC Power
Max load = 50 mA
0 to +30 V DC
Max load = 100 mA
Max voltage = +30 V DC