Operating Instructions 8 No; Main Components; Before Initial Start-Up - Metabo PL 5-30 Instrucciones

en
Operating instructions
The Metabo PL 5-30 is a simple to operate 5 point laser for use horizontal
and vertical levelling and also for use in a plumb line function. This laser
can measure 90° angles with great precision. It is self-levelling in the
range ± 4,5° and enables levels to be determined quickly and accurately.
Read the User Manual along with the illustrated portion. Follow the general
instructions on the handling, care and maintenance of the instrument.
Observe the safety instructions on laser beams.

Main components

A
(1) ON / OFF switch (for protecting during transport)
(2) LED green : Operating mode ON or READY
(3 a/b/c) Exit aperture : horizontal at 90° angle to each other
(4 a/b) Exit apertures : for plumb line laser
(5) Sliding cover - > horizontal exit aperture
(6) Foot - extendable
(7) Release lever
(8) Battery compartment cover
(9) Protective cover
(10) 1/4" threaded connector for tripod
(11) Magnets
(12) Wall bracket

Before initial start-up :

A
The warning notice in your language must be clearly affixed on the laser
instrument at the position indicated. The appropriate stickers are enclosed.
This sticker with the warning notice written in the usual language must be
affi xed here in place of the English text !
LA SE R RA DI ATIO N
DO NO T ST AR E IN TO BE AM
LA SE R CL AS S 2
Batteries must be inserted -> changing batteries
8