Promise Technology FASTTRAK TX4650 Guia De Inicio Rapido página 4

FastTrak TX4650, TX2650 Quick Start Guide
Step 2: Installing the FastTrak Card
The FastTrak TX4650 or TX2650 card fits into any available PCI-E x1, x4, x8, or
x16 slot in your PC's motherboard.
FastTrak RAID
Controller card
PCI-E slots
Motherboard
1. Remove the cover of your system.
2. Install the FastTrak TX4650 or TX2650 card into the open PCI-E slot.
3. Fasten the controller card bracket to the system's frame.
4. Attach your system case's 2- or 4-pin LED cable to the LED connector on the
FastTrak TX4650 or TX2650 card.
The FastTrak TX4650 or TX2650 card is a PCI-E Plug-n-Play
(PnP) device. No changes are necessary in the motherboard
CMOS/BIOS Setup for resources or drive types in most
applications.
Attaching screw
Bracket
Note
System frame
4
PCI slots