Crosley CR2405D Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
CD Playback Operation
1. Press the CD button to set the unit to CD mode.
2. Press the Eject button to open the CD tray and put the CD in the tray with the
labeled side facing up.
3. Press the Eject button again to close the tray. The LCD display will show
"BUSY" for a few seconds, then the total number of tracks on the CD. If it is a
blank CD or an unrecognizable CD, it will show "NO DISC".
Note: MP3 or similar types of digital audio files can not be read by the CD player.
4. Press the Play/Pause button to start the playback.
5. During the playback, press the Play/Pause button to pause. Press it again to
resume playback.
6. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly.
7. To search fast forward or backward a track, press and hold the Forward Skip
or Backward Skip button correspondingly until you reach the desired time.
Release the button and the playback will resume.
8. To repeat the whole CD, Press Repeat button once and the LCD display will
show "REPEAT ALL". To repeat a specific song, press Repeat button twice
while that track is playing and the display will show "REPEAT 1. To cancel
repeat function, press the Repeat button until the word Repeat disappears
from the display.
9. Press the Stop button if you want to completely stop playback.
Programmed Playback
1. Before starting the playback, press the Program button once to enter
program mode. The LCD display will show "PROGRAM" and "001 P-01".
2. Press the Forward Skip or Backward Skip buttons to select the track
that you would like to play.
3. Press the Program button to confirm the selected track.
4. Repeat steps 2 & 3 for additional sound tracks that you would like to play.
The tracks can be in any number and repeated. A maximum of 20 tracks
can be programmed at one time.
5. Press Play/Pause button to start the programmed playback. The tracks
will play in the same sequence that you programmed earlier.
6. To exit the program mode, press the Stop button.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido