System Requirements; Hardware Description - SMC Networks SMC7204BRB Guia De Inicio Rapido

System Requirements

In order to use the ADSL Barricade
the following:
• ADSL service up and running on your telephone line,
with at least one public Internet address for your LAN.
• One or more computers, each containing an Ethernet
10/100 Base-T network interface card (NIC).
• An Ethernet hub/switch, if you are connecting the device
to more than one computer on an Ethernet network.
• For system configuration using the supplied web-based
program: a web browser such as Internet Explorer V5.0
or later, or Netscape V6.1 or later.
3
TM , you must have

Hardware Description

Front Panel
LED Label Power Link
Color Status Green Green
Green Steady Power On ADSL line
is trained.
Green Blink N/A Training
Yellow Steady N/A N/A
Yellow Blink N/A N/A
OFF Power Off No
Connection
Ethernet
TX/RX
1 2 3 4
Green Green / 100 Mbps
Yellow / 10 Mbps
DSL Transmitting/ Link
Receiving
TX/RX Transmitting/
Receiving
N/A Link
N/A Transmitting/
Receiving
No TX/RX No Connection
4