Besides the flat cable, you also have to connect the cable that runs to the 16-651 to the doorbell. Install the modules as in fig. 4 (see also user manuals and
installation instructions of the corresponding modules). The adjustable lighting module is mounted in the correct place at the top in the column. Preferably
install the camera at a height of ±165cm. The camera is usually mounted underneath the lighting module but you can choose the order of the modules
yourself. If the external unit is not provided with a camera, preferably install the loudspeaker module at a height of ±145cm.
fig. 5: mounting the 2-piece front plate
Mount the 2-piece front plate to the frame by means of the supplied screws (fig. 5). Then slide the side profiles at the front on both sides between the front
plate and the column (fig. 6). The profiles are fixed by the cover cap. Screw-fix the cover cap by means of the 4 supplied screws.
3. PRODUCT MAINTENANCE
By means of the maintenance tips below, we want to ensure that the surfaces of these luxury products are not damaged by improper use. Damage by
improper use is not covered by the guarantee provisions.
Maintenance tips
- It is sufficient to clean the product with a little soap and a damp cloth.
- We strongly advise against the use of the following products:
- Abrasive sponges or abrasive detergents;
- Maintenance products that contain solvents or acids, or cleaning products containing acetic acid.
14
fig.4: mounting the modules
fig. 6: mounting the side profiles and covering them by means of the cover cap