- GB -
Safe operation
Never carry or pull the unit by the electrical cable.
Route cables such that they are protected from damage and do not present a tripping hazard.
Only open the unit housing or its attendant components if this is explicitly specified in the operating instructions.
Only carry out work on the unit that is described in this manual. If problems cannot be overcome, please contact an
authorised customer service point or, if in doubt, the manufacturer.
Never carry out technical changes to the unit.
Only use original spare parts and accessories for the unit.
Keep the socket and power plug dry.
Information about these operating instructions
You made a good choice with the purchase of this product NCTL-O 200.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
Warnings
The warning information is categorised by signal words, which indicate the extent of the hazard.
WARNING
Indicates a possibly hazardous situation.
Non-observance may lead to death or serious injuries.
CAUTION
Indicates a possibly hazardous situation.
Non-observance may lead to slight or minor injuries.
NOTE
Information for the purpose of clarification or for preventing possible damage to assets or to the environment.
Additional information
A
Reference to a figure, e.g. Fig. A.
Reference to another section.
- GB -
11