Electrical Requirements; Troubleshooting; If Hand Mixer Malfunctions Or Fails To Operate - Kitchen Aid KHM31 Manual De Instrucciones

HAND MIXER SAFETY
9. Do not let cord hang over edge of table or counter.
10. Do not let cord contact hot surface, including the stove.
11. Remove any accessories from Hand Mixer before washing.
SAVE THESE INSTRUCTIONS

Electrical requirements

Volts: 120 A.C. only.
Hertz: 60 Hz
NOTE: This Hand Mixer has a polarized
plug (one blade is wider than the other).
To reduce the risk of electric shock, this
plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not
modify the plug in any way. This product
is designed for household use only.

TROUBLESHOOTING

If Hand Mixer malfunctions or fails to operate

First try the solutions suggested here and possibly avoid the cost of service.
1. Is the Hand Mixer plugged in?
2. Is the fuse in the circuit to the Hand
Mixer in working order? If you have
a circuit breaker box, make sure the
circuit is closed.
3. Try unplugging the Hand Mixer, then
plug it back in.
If the problem cannot be fixed with the
steps provided in this section, then contact
KitchenAid or an Authorized Service Center.
USA/Puerto Rico: 1-800-541-6390,
Canada: 1-800-807-6777,
Mexico: 01-800-024-17-17
(JV Distribuciones)
or
01-800-902-31-00
(Industrias Birtman)
See the "Warranty and service" section for
additional details. Do not return the Hand
Mixer to the retailer – they do not provide
service.
5