Descargar Imprimir esta página

Declaration Of Conformity - Carpoint WET & DRY Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

The vacuum cleaner only works on 12V. Do not use if any sign of damage is seen. Keep out of the reach of children. Do not make
alterations or adjustments. Keep ventilation slots free. Wound up the power cord properly. To prevent damage to the appliance do not
suck up large, sharp, pointed, or hot objects.
Use:
• Ensuring that the power cable is fully unwound.
• Choose the correct adaptor; brush (5) and crevice tool (6) for suction, and inflation adaptor (7) for inflation.
• Switch on the vehicle ignition before plugging the vacuum cleaner into the cigarette lighter socket.
• Turn on the vacuum cleaner by using the ON/OFF switch.
• When you are ready, turn off the vacuum cleaner (ON/OFF switch) and pull the plug out of the socket. Wound up the power cord.
Remember to empty the dust reservoir after every use.
Hold the vacuum cleaner with the dust reservoir pointing towards the floor and open the locking clip (9). The dust reservoir can easily be
emptied. Put the two parts back together and close the clip.
WEEE and end of life disposal
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To return your used
device, please use the local return and collection systems or contact the retailer where the product was purchased.

Declaration of conformity

Service Best International B.V.
De Run 4271
5503 LM Veldhoven
The Netherlands
T: +31 (0)40 2302300
F: +31 (0)40 2302302
hereby declares that 1710013 Vacuum cleaner 'Wet & Dry' 12V/135W is in compliance with the essential requirements and other
relevant provisions of EN 55014-1:2006, EN 55014-2:1997/+A1:2001 (EMC Directive 2004/108/EC).
The Technical Construction File is maintained at our offices in Veldhoven, The Netherlands.
Veldhoven, 29 March 2012
P. Zwanenburg, managing director

Publicidad

loading

Este manual también es adecuado para:

1710013