Installation - Focal SCALA V2 UTOPIA Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION

Positioning
The loudspeakers have been engineered to deliver the most faithful sound reproduction, whether they are used for music or home
cinema. In order to enhance their performance, to guarantee a high quality of listening, sound image and tone balance, it is important
to note the following basic rules.
The listening area must be located at the summit of an equilateral triangle whose two other points of insertion are determined by the
position of each speaker. Nevertheless it is possible to modify these distances to find an ideal compromise according to the particular
disposition of the room (fig. A).
Each loudspeaker must be placed at the same height and on the same floor plan. The tweeter should be at the same height as the
listener's ear, when the listener is in their usual listening area (fig. B).
Avoid placing the loudspeakers too close to the room's corners or walls. This will induce some unwanted room resonance and
artificially increase bass response. On the contrary, if the bass level proves to be insufficient, it is possible to move the speakers closer
to the walls to adjust the bass level (fig. C).
Optimization
To please the perfectionists, we shall give an optimum positioning formula : if A is the distance from the boomer centre to the closest
wall (floor or wall), B the intermediate distance and C the longest distance (A<B<C), the relation B2=AC determines the ideal position
of the speakers.
• Example:
If the boomer centre is 50cm (20") away from the rear wall (A) and 60cm (24") above the floor (B), then the side wall will be ideally 72cm
(28") (C=B2⁄A=72cm) (fig. E).
Connections
Input sockets ensure reliable multipurpose connections for stripped cables as well as for plugs. It is imperative to respect the connector
polarity of both the loudspeaker and amplifier. The positive terminal "+" must be connected to the corresponding (matching) amplifier's
terminal and the negative terminal "-" to the negative terminal. Stereo image, soundstaging and bass perception would be seriously
compromised if these conditions were not respected.
8

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido