Efapel sirius70 Manual Del Usuario página 38

Desired
temperature
2.4 Temperature Limits (setting minimum and maximum)
Press
temperatures). Press OK to select or
2.4.1 Minimum Temperature setting
Press
33,5°C). Press OK to confirm and exit. (Default setting: 9,0°C).
Note: The thermostat does not allow the minimum temperature to be set higher
than the maximum temperature, or lower than the Antifreezing temperature
setting (see 2.6). This setting also serves as a limit to protect against the
floor getting too cold (which is measured via the Floor Probe), so that the
floor temperature does not go below the minimum temperature limits set.
2.4.2 Maximum Temperature setting
Press
35,0°C). Press OK to confirm and exit. (Default setting: 29,0°C).
38
to navigate through the options (Minimum or Maximum
or to select minimum desired temperature (8,0°C to
or to select maximum desired temperature (9,5°C to
to go back.