Maintenance And Cleaning - Metria YPB Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ALWAYS MAKE SURE YOU CALIBRATE YOUR SCALE BEFORE USING
FEATURES
High precision load cell
Resistant plastic housing
LCD display
Height-adjustable feet
Overload protection
Checking weighing, piece counting function
RS232 Interface
ATTENTION!! The maintenance and cleaning of
the equipment are very important for its correct
operation and durability
YPB Models • All Rights Reserved
www.labbox.com
VI. Maintenance and Cleaning
To get the best results and for product longevity, be sure to follow the suggestions below.
Note: All of the suggestions and guidelines mentioned below and through- out this
manual will only be effective with continuous and careful maintenance of the
equipment
Follow all processes outlined in the manual
Make the manual available to all users of the equipment
Prevent the balance from any sudden movements or falls, as well as from
direct sunlight or air flow. The balance is a precision instrument and must be
handled carefully
Balance must be plugged into a grounded electrical outlet and the socket
should be easily accessible to unplug in case of emergency
Never unplug the balance by pulling on the wire, do so from the base
Never use the balance in a wedged-in location, such as a shelf
Never use other objects such as pens, pencils, etc. to press the but-
tons on the control panel; use only your fingers
Never place anything on the pan heavier than the maximum capacity of the
balance, or the sensor could be damaged
Do not submerge the balance, nor spill any liquids on it
If any liquid does come into contact with the electrical parts of the balance,
immediately disconnect it and send it in for service to be
checked and adjusted if necessary
Always use only original components and supplies. Other devices and parts
may appear similar, but can damage the equipment.
Cleaning
Never use scourers or substances that can damage metallic parts. This
include, but is not limited to, stainless steel, aluminum, coatings, etc.. These
can damage the balance and lead to early erosion of effectiveness of the
balance.
Use a lint-free cloth, dampened with soapy water, that does not contain any
abrasive surfaces, nor corrosive materials
YPB Models • All Rights Reserved
www.labbox.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bypb-600-001Bypb-3k0-001

Tabla de contenido