GPO KW938BT Manual Del Usuario página 9

3. The unit has a built-in speaker (14), it will be working alternatively if
you don't connect Earphones to the Phone Jack (11)
4. Open the Cassette Door (1) and insert a pre-recorded cassette tape
face upwards.
5. Close the Cassette Door (1).
6. Press the Play Button (4).
7. Adjust the Volume Control Knob (8) to your preferred sound level.
8. Press the Fast Forward Button (3) if you wish to rapidly advance the
cassette tape.
Press the Stop Button (2) after you have advanced to the desired point
on the cassette tape.
9. Press the Rewind Button (5) if you wish to rapidly rewind the tape.
Press the Stop Button (2) after you have rewound to the desired point
on the cassette tape.
10. Press the Play Button (4) to start to listen the cassette tape again.
Recording into Cassette Tape
1. Insert an empty cassette tape as previously described. Press the
ORANGE Colour Record Button (6) & the Play Button (4) will be
depressed with it. You are now recording. If the Record Button
(6) cannot be pressed down, see "PREVENT ACCIDENTAL
ERASURE".
2. Talk normally into the Built-in Microphone (7). To obtain optimum
recording quality, place the unit with the Built-in Microphone (7)
freely exposed and as close as convenient to the sound source.
3. You can press the Rewind Button (5) to go back to the beginning
of the cassette tape, make another recording to cover the previous
recording.
9