Descargar Imprimir esta página

Charging Battery - Meister i-Light MTL 12i Traducción De Las Instrucciones De Servicio Originales

Lámpara led con acumulador

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
5450700-i-light-man_b 31.08.10 11:00 Seite 26
CAUTION! The safety
instructions on the battery
and charger of the i-drill
cordless drill No. 5450420 must
be observed at all times.
Save all warnings and instructions
for future reference.
• Do not expose power tools to
rain or wet conditions. Water
entering a power tool will
increase the risk of electric
shock.
• Only use chargers to
recharge the battery that
have been recommended by
the manufacturer. When using
a charger designated for a
particular type of battery, there
is a risk of fire if it is used with
other batteries.
• Only use the batteries
designed for use in the
electric tools. The use of other
batteries may lead to injury and
risk of fire.
• When not in use, keep the
battery away from paper clips,
coins, keys, nails, screws or
other small metallic objects
that may bridge the contacts.
A short-circuit between the
battery contacts can lead to
burns or fire.
• Fluid can escape from the
battery when used incorrectly.
Avoid all contact with this. In
the event of accidental contact,
rinse with water. If liquid should
get into the eyes, get medical
assistance. Battery fluid may
26
result in skin irritations and burns.
• Do not look directly into the
bright beam of the LED
battery lamp.
• Do not short-circuit the
contacts of the battery or
charger.
6 – Charging battery
CAUTION! The LED battery
lamp MTL 12i can only be
operated with the cordless i-drill
3102B, which can be charged
with the CHP090027 charger. The
mains adapter unit may only be
operated with a power supply
that has an alternating current of
230 V and a frequency of 50 Hz.
The use of any other mains
adapter units or the use of the
CHP090027 with another type of
power supply may lead to
personal and property damage.
CAUTION! The safety
instructions on the battery
and charger of the i-drill
cordless drill No. 5450420 must
be observed at all times.
7 – Operation
Inserting the battery
Insert the battery (4) into the
battery compartment in the
handle (3) of the lamp until it
clicks audibly into place.
Removing the battery
Press the battery locking button (6)
and remove the battery (Fig. 2).

Publicidad

loading