Wiseup P6000 Guia Del Usuario página 3

All manuals and user guides at all-guides.com
You will see the red indicator light flash for 10 seconds and then turn off.
3.3. AUDIO RECORDING& CAMERA/STILLPHOTOGRAPHY
3.3.1. Slide the Mode Switch to the position R, power on the camera by pressing
the Power Button for 2 seconds. Both red and blue indicator lights will stay
illuminated for 9 seconds, then the blue indicator light will stay illuminated while the
red one will turn off, indicating the camera has entered into standby mode.
3.3.2. Press the Power Button for 2 seconds again to start audio recording. The
blue indicator light will start flashing slowly.
3.3.3. Press the Power Button once to stop audio recording. The blue indicator light
will stay illuminated, indicating the camera is back to standby mode.
3.3.4. In standby mode, press the Power Button once to take a photo. The blue
indicator light will flash once every time you take a photo.
[Note]:
Audio Format: WAV
IV. Video/Image Files Uploads
4.1. Power off the camera and unscrew the pen to reveal a USB port.
4.2. Connect the camera to a proper PC computer USB port by using the USB
cable provided.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1. Power off the camera, unscrew the pen to reveal a USB port.
5.2. Connect the camera to a proper PC computer USB port by using the USB
cable provided.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a txt
file named "time.txt".
5.5. Write the current date and time in the "time.txt" file with the correct format:
YYYYMMDDHHMMSS Y (For example: 20160412142432 Y). If you don't need the
time and date stamp on the video footage, you can change the "Y" into "N" in the