Doro MemoryPlus 319ph Manual Del Usuario página 8

Connection
Connect the telephone cord to a network wall socket
1.
and to the
Connect the spiral cord to the handset and to the
2.
socket on the base of the telephone.
You will hear a click when the modular plug is
3.
correctly in place.
Set correct
4.
Information).
Lift the handset and listen for the dial tone.
5.
Ring signal
��ere i� � ring �ign�l �wi�c� underne��� ��e �elep���ne:
Ring volume
Ring tone
Memories
Saving speed dial numbers
Make sure that the Make sure that the
1.
telephone is set to
Lift the receiver and press Lift the receiver and press
2.
you hear in the earpiece).
Enter the phone number (up to 16 digits) using the Enter the phone number (up to 16 digits) using the
3.
keypad. Press Press Press
Select memory position by pressing the Select memory position by pressing the
4.
corresponding button.
Replace the handset. The number has now been saved. Replace the handset. The number has now been saved.
5.
Remember to return the
the telephone to the
numbers have been saved.
Press if you want a pause in the telephone number.
English
Settings
socket on the back of the telephone.
T
button time to 100 (see Technical
Flash
/
R P
.
P
( ). .
P
R
The number has now been saved. The number has now been saved.
R
position when all the telephone
R
switch on the base of the
( ( ) (ignore anything (ignore anything
P
R
/ switch on the base of
P

q