Promise VTRAK M610p Guia De Inicio Rapido página 5

Step 2: Mounting VTrak in a Rack
The VTrak M610p subsystem installs directly to the rack with the included
mounting rails or rails from another company. Refer to Chapter 2 of the VTrak
Product Manual on the software CD for instructions on installing the rails and
mounting your VTrak.
• At least two persons are required to safely lift, place, and
attach the VTrak enclosure into a rack system.
• Do not lift or move the VTrak enclosure by the handles, power
supplies or the controller units. Hold the enclosure itself.
• Do not install the VTrak enclosure into a rack without rails to
support the enclosure.
Step 2: Mounting VTrak in a Rack
Cautions
5