Assembly Instructions for Model Number 724UP , 730UP , 736UP , 742UP and 748UP
IMPORTANT INFORMATION
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of
return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please
save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you
discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday
9 a.m. to 4 p.m. EST) or at info@midwesthomes4pets.com.
Parts Identification: Fold & Carry Pet Home, Plastic Pan, Folding Divider Panel, and Plastic Carrying Handles (Note: 724UP ,
730UP , and 736UP have 1 Handle; 742UP and 748UP have 2 Handles)
ASSEMBLY INSTRUCTIONS
1. Remove the folded crate from the carton so that the plastic
pan is on the bottom. Unhook the lock latch located on the
side.
2. Grab any wire on the top panel and turn it like the page of a
book.
3. Grab the top panel of the crate and pull upwards. This will
form the top and the sides.
800-428-8560
midwesthomes4pets.com
P .O. Box 1031
Muncie, Indiana 47308
Lock Latch
1