Assembly Instructions for Model Numbers 550-18, 550-24, 552-30, 554-36, 556-42, 558-48
IMPORTANT INFORMATION
Remove collars, tags, and leads from pet before placing it in the pen to prevent possible entanglement. DO NOT leave
young animals unsupervised for extended periods of time. MidWest's main concern is your pet's well-being. If your pet
has never been kept in any enclosure, specific training may be necessary for your pet's safety. A pet, not specifically
trained to be restricted, may attempt to escape from this enclosure, which could cause serious injury to your pet or this
product. MidWest will not accept liability or warrant any loss due to improper use of this product by a pet that has not
been properly trained.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of
return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please
save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you
discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday,
9 a.m. to 4 p.m. EST) or at info@midwesthomes4pets.com.
PARTS IDENTIFICATION
(1) Exercise Pen (8 connected panels)
ASSEMBLY INSTRUCTIONS
1.
Remove contents of the packing carton. Locate the
Exercise Pen (8 connected panels), the ground
anchors, and snaps.
2.
The exercise pen can be set up in many different
configurations. Decide what configuration you'd like
to use and set up the pen. (Note: The pen can be
moved and reconfigured after it has been assembled.)
3.
Connect the two ends with the snaps as shown in
picture. For best results, place snaps at top and
bottom between the two closely spaced wires, and
space the remaining two snaps evenly along the
middle wires.
(4) Ground Anchors
800-428-8560
midwesthomes4pets.com
3142 S. Cowan Rd.
Muncie, Indiana 47302
(4) Snaps
1