Setting Up For Operation - auna Microstar Sing Manual De Instrucciones

EN

SETTING UP FOR OPERATION

Connecting power
Plug the supplied AC adapter into the DC jack on the rear side of the
unit and connect to a standard AC wall socket with 220-240V~ 50/60Hz
continuous power supply.
Note: When the unit is not operated for long periods of time, unplug the AC
adapter from the unit and wall outlet.
Connecting to the TV
The karaoke system provides a patch cord to give you the option of
connecting your unit to an external audio/video device. The patch cord
has three RCA jacks at each end. White and Red are for left and right
audio connections and the Yellow is for video. Modern flat panel digital
TV sets and home music systems are usually equipped with corresponding
colour-coded RCA jacks to assist correct connections. Make sure that you
have a CD+G disc in the karaoke system playing when you are making this
connection. You will know you have the proper settings on your TV as soon
as you see the lyrics on the screen.
Video connection
Please follow the steps below to display CD+G lyrics on the TV screen:
1. Locate the color-coded patch cords.
2. Connect video cable (Yellow) to the VIDEO OUT on the back of the
karaoke system.
42