Power On/Off; First Steps - mediatech MT849 Manual De Usuario

Charging
Use USB cable and plug into USB charger or
USB port in PC computer. During charging bat-
tery icon will animate. After ca. 2 hours battery
is full, battery icon animation is stopped.
Note! We recommend to perform at first three
full charging cycle in order to format built-in bat-
tery. If device is not used for longer timer please
charge it once a week at least.

Power on/off

Press and hold power button for 3 seconds
to power on the device, repeat this action to
power off the device. When device is in stand-
by mode press once Power button to resume/
power save LCD.

First steps

1. Fully charge device before first use.
2. Power on the smartwatch and go to the
Bluetooth section. Enable searching for
Bluetooth devices.
3. Enable Bluetooth interface in your smart-
phone and enable visibility for unpaired
devices.
4. Use smartwatch and select your smart-
phone on the list.
5. On both devices you should see the same
passcode. Click OK on both devices to pair
successful.
6. Now install "Smilemi" application. Display
QRcode on the smartwatch (go to settings/
APK/GooglePlay" and use your smartphone
to scan this code, next open scanned link in
the GooglePlay store.
7. Wait until application is downloaded and
installed.
EN
3