Parker SCMA-VADC-600 Manual De Instrucciones página 44

Explanation for one example:
±20 mA 0.6...3 V -1 123 4 mA 20 mA
A connected pressure sensor (with a measurement range of -1 bar to 123
bar) delivers an output signal from 4 mA to 20 mA. The current/voltage
converter should be set to a measurement range of 20 mA. If the current/
voltage converter is connected to channel 1 of the "3/4-channel portable
measuring instrument", then the menu option IN1 will be selected on the
portable measuring instrument (under the menu choice AUX. SENSOR,
in the SET menu). The units, measuring range and value range for the
output signal can then be specified in the display shown. The menu se-
quence and the display entries are shown below:
44