Parker SCMA-VADC-600 Manual De Instrucciones página 48

Explanation with one example:
±48 V 0...3 V 0 300 0 V 10 V
A connected sensor delivers a physical output signal in the 0 V to 48 V
range. The display should show values from 0 cm to 300 cm. A measur-
ing range of 48 V must be set on the current/voltage converter. With the
"6-channel portable measuring instrument", the menu choice FREMD-
SENSOR (AUX. SENSOR) is used to specify the channel on which the
current/voltage converter is connected. The "6-channel portable measur-
ing instrument" is configured by entering the units, the measuring range
and the value range of the output signal. The desired value range is en-
tered under UNIT FROM/TO. The values based on all voltage signals are
entered under SIGNAL FROM/TO.
4