Commercial Electric LEDR56/4WY/HD Guía De Uso Y Cuidado página 6

Installation into Existing Recessed LED Fixture with Compatible
Orange Connectors
NOTICE: LED recessed trim will retrofit into select existing
nominal LED housings.
1
Turning Off the Power
□ Turn OFF the power at the switch and fusebox
or circuit breaker.
2
Removing the Existing Trim
□ Remove the existing trim installed in the
recessed housing (if necessary) and discard
the medium base adapter.
3
Connecting the Wires
□ Connect the orange connectors
together. (See Fig. 2B)
Fig. 2A
Fig. 2B
Connect the orange connectors
4
Inserting the Trim
□ Insert the torsion springs into the
fixture brackets. (See Fig. 2A)
5
Securing the Trim
□ Gently push up the trim and torsion
springs so that they begin to
expand and lift the trim into place.
(See Fig. 3A)
Fig. 3A
Diagram of the Recessed Fixture
19 cm
(7-1/2 in.)
6
15.5 cm
(6-1/4 in.)