READ.ME.FiRsT
Thank you for your purchase of the Jabra Link EHS Adapter. This
manual is intended to guide you through the steps needed to install
the Jabra Link.
pLEASE NoTE you wILL NOT.NEED.ALL cAbLES INcLuDED IN THE
pAcKAgE. THE cAbLES you NEED ArE LISTED AT THE STArT of
EAcH pHoNE SEcTIoN.
PacKage coNteNts
Jabra LINK EHS Adapter
cable marked
white
A
cable marked
b
white
cable marked
c
white
cable marked
D
white
cable marked
orange
cable marked
red (Already plugged into the Jabra LINK)
cable marked
purple (2.5 mm Jack)
Manual
comPatible Jabra headsets
Jabra.Devices
The Jabra LINK EHS Adapter can be used with the following Jabra wireless
office headsets:
-. gN9330
-.. gN9350
-.. gN9120.Ehs
-.. gN9125.Ehs
-. gO.6400.series.
-. PRO.9400.series
-.. Multiuse.portfolio.with.A7010.Bluetooth.hub.with.Dhsg.support
-.. And.new.wireless.products.to.come.with.Ehs.support
4
KNow your Jabra liNK ehs adaPter
The connection sockets are located on the rear side of the device.
The Jabra LINK EHS Adapter features six connection sockets:
. AUX.socket.
.
Data interface between Jabra LINK EHS Adapter
and headset base unit
. Phone.socket.
Audio interface between Jabra LINK EHS Adapter
.
and headset base unit
. Dictaphone.socket.-.2,5.mm.Jack
. .
Audio voice recording of a telephone
conversation
. COM.socket
Data interface between Jabra LINK EHS Adapter
and desk phone unit
. headset./.handset.socket.
.
Audio interface between Jabra LINK EHS Adapter
and desk phone unit
. Ring.tone.detector.socket.-.2,5.mm.Jack
.
Sensor for detecting desk phone ring tone
Note:.The marked end of each cable must be connected to the Jabra LINK EHS
adapter.
5