Twin-Star International Duraflame 10IF9239BLK Manual Del Usuario página 5

OPERATION INSTRUCTIONS
FUNCTION
POWER
FLAME
TEMPERATURE
TIMER
A212
ICON DESCRIPTION
Use the POWER button to turn on or off the unit from the
remote or control panel.
To adjust the flame brightness press the FLAME button.
Once pressed the display will flash the current brightness
setting. Press the FLAME button again to adjust the
brightness.
There are 5 brightness settings, 5 is brightest and 1 is
dimmest.
To turn on the heater press the TEMPERATURE button.
Once pressed the display will flash the current setting
temperature; press the TEMPERATURE button to cycle
through the settings.
Pressing and holding the TEMPERATURE button on the
control panel for 5 seconds will switch between deg oF to oC.
The thermostat setting range is 60°F - 82°F or 16°C - 28°C or
always ON.
To set the sleep timer press the TIMER button. Once
pressed the display will flash the current timer setting length,
press the button to set the desired timer.
Timer settings are 0H,30,1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H
and 9H.
5
www.tsicustomerservice.com