Cable Connections - Uline ZEBRA QLN420 Manual Del Usuario

CONNECT THE PRINTER WITH A CABLE
It is possible to connect the printer to a terminal or a
PC using either RS232C or USB protocols. USB drivers are
included in the Zebra Designer Driver, which is available
on the QLn Series product CD or from the Zebra web site
at www.zebra.com.
CONNECT THE PRINTER WITH A TERMINAL
See Figure 9.
CONNECT THE PRINTER WITH A PC
See Figure 10.
PAGE 6 OF 30

CABLE CONNECTIONS

Figure 9
Communications Port
Figure 10
RS232 Connector
RS232C or USB Communications
RS232C or USB Communications
Cable to Terminal
Terminal
Cable to Terminal
USB
Connector
0615 IH-4707