Con Ne Ct Powe R And Ground - LiftMaster MyQ business CAPXL Guia De Inicio Rapido

SETUP ( )
CONTINUED
7 . AD D CRE D EN TI ALS
1. On the left navigation bar, click Credentials.
2. Click the Add Credential button to add transmitters, cards, etc. Individually or in bulk
to the Facility.
3. Click Save.
NOTE: A credential must be associated to a person for it to be active. See Step 8.
8 . I N VIT E FA C ILITY O W NER AN D A DMI NISTR ATOR S
1. From the People menu, click the Add Person button.
2. Enter fi rst and last name. You may enter other optional information on this page
(Email, Role, Address, Directory, Credentials, Access, and Vehicles).
3. Click Save.
4. The person will receive an email invite to log into the Facility with rights determined
by their role. The ranking of roles, from highest are Dealer Owner and Facility Owner,
which have the most control, followed by Dealer Manager, Facility Manager, Dealer
Tech, and Access Manager.
INSTALLATION
1 . I N S TAL L CA P X LV
Remove knock outs as required and mount the CAPXLV
to a pedestal, a fl at solid surface, or into the optional
trim kit and back box accessory (CAPXLTK).
2. IN STAL L AC CESSO R I ES
Install radio and Wi-Fi antennas, postal lock, optional card
reader, and optional quick call input board as required.
NOTE: CAPXLV includes a camera.CAPXL retrofi t
accessory kit (CAPXLCAM) for CAPXL or for replacement.
CAPXLCAM (optional)
LPEXP
(optional)
Card Reader (optional)
9. A D D P ER SO N
1. From the People menu, click the Add Person Button.
2. Add staff, residents, and vendors. This includes phone number(s), entry code(s),
credentials, group(s), and activation dates.
3. Click Save.
NOTE: A person must be in a group to access any entrances in the community.
10 . CO N FI RM S E T U P PRIOR T O I NS TA L L AT I ON
Confirm settings match those in myQ
Make a test phone call (this can be done by calling a name in the directory or using the
SIP test function under Network in the CAPXLV Admin mode.
Disconnect power and Internet after settings have been confi rmed.
1 1. V ER I F Y V I DE O CAME RA O PE RAT ION
1. Turn on CAPXLV Admin mode, Locate and turn on DIP Switch 1 (located on Power &
Internet board).
2. Make a test phone call using the SIP test function under Network > Test Sip. Enter a
phone number and press the green phone icon.
3. Open the Audio/Video tab to confi rm the video feed is working.
4. Turn off CAPXL Admin mode. Locate and turn off DIP Switch 1 (located on Power &
Internet board).
5. Perform multiple access events at the CAPXLV and confi rm archived video clips appear
in the Activity Log.

3 . CON NE CT POWE R AND GROUND

Route power wires from included Power Supply to CAPXLV
and plug transformer into a 120 Vac outlet. Confi rm
CAPXLV powers on. Connect ground lug to earth ground.
See the full manual for more information.
Wi-Fi
Postal Lock (optional)
™
Business .
®
POWER INPUT
Power/Internet Board
120 Vac
Power Supply
Dedicated Outlet