Turning On And Off - Wayscral NO7066 Manual De Instrucciones

15. Pre-set +
16. Pre-set -
17. SET button
18. Air intake
1
OPERATION
CONNECTING THE AIR HOSE
1. Select the suitable adapter and insert it into
the thread connector and tighten.
2. Insert the pressure hose into the hose
interface.
ILLUSTRATION

TURNING ON AND OFF

To turn on, press
and hold the power
button for 3 seconds
and wait for the
progress bar to
complete, as shown
in the figure below.
• The appliance will turn off automatically when
not in use for 3 minutes.
• The appliance will automatically turn off when
the battery is low.
MEASURING THE AIR PRESSURE
After turning on the electric air pump, connect
the air hose with the item to be inflated. The
current air pressure value will be displayed on
the display screen.
CLEARING THE
After turning on the electric air pump, if the
2 3
READINGS
8
4
5
6
7
14
15 16
18
AIR HOSE TYPE
Presta valve
Ball needle air nozzle
American air nozzle
To turn off, press
and hold the power
button for 3 seconds
and wait for the
progress bar to
complete the shut
down.
9
10
11
12
13
17
31
EN