MC402
Removing a memory card
➤ Change the audio/video source.
➤ Press the memory card in and release it again.
➤ Take the memory card out of the slot and close the cover.
Inserting a USB flash drive
You can connect a USB flash drive to the device.
I
NOTE
The device can play MP3 files which are stored on a USB flash
drive.
➤ Open the cover and plug the USB flash drive into the USB port.
✓ The device reads the files on the USB flash drive and shows them on the
display.
Removing a USB flash drive
➤ Change the audio/video source.
➤ Take the USB flash drive out of the slot and close the cover.
4
Listening to the radio
The radio has the FM1, FM2, FM3, AM1 and AM2 frequency bands. Six pre-
sets are available for each frequency band.
Selecting the radio as audio/video source
➤ Select the audio/video source, see chapter "Selecting the audio/video
source" on page 21.
Selecting the radio station
➤ Touch one of the P1 to P6 station presets on the display to select the
required station.
Searching for a radio station
You can set a radio station manually by using the cursor keys or via the num-
ber pad to set the required frequency.
EN
Listening to the radio
23