Grifo DVEP20 Manual De Instalación, Empleo Y Mantenimiento página 36

GB
The machine consists of a loading hopper, which contains the grapes to be
destemmed. At the bottom of the loading hopper, there is a auger feed that pushes
the grapes towards two rollers that will crush them.
It then conducts them into the lower part where, thanks to a circular movement, the
destemmer shaft paddles separate the grapes from the stems. The grapes, together
with the freshly squeezed must, fall into the lower bin through the grate situated
inside the machine. They are then taken by another auger feed into the centrifugal
must pump that transfers them into a fermenting vessel.
The destemmer shaft is manufactured in such a way that through its helical
movement, the welded paddles on it push the stems to the output shoot.
Transmission guard
Fig. 1 Main parts of the GRAPE CRUSHER AND DESTEMMER WITH PUMP
Loading
hopper
Motor and controls
Document
Manuale vasca e pompa
Flie name
Manuale vasca e pompa
Loading
guard
Destemmer
guard
Auger feed
Year
2016
Page
Revision 9 of 25
0