II. What's in the Box
-1× Pen Camera
-1× USB Cable
-1× AC110-240V to DC 5V Charging Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Please make sure your pen camera is fully recharged before using.
>> Please make sure the Micro SD card has been formatted already and is
securely fitted into the camera's SD card slot, or it will not work. We recommend
you to use a SDHC Class 10 Micro SD card.
[Note]: If no Micro SD card is fitted into the camera, the camera will shut down automatically. Both
blue and yellow indicator lights will come on and flash 6 times, then turn off.
3.1 VIDEO RECORDING
3.1.1 Slide the Mode Switch to the position 2, power on the camera by pressing the
Power Button for 2 seconds, both yellow and blue will flash and then turn off. Press
the power button once again to get into standby mode, the yellow indicator light will
be solid on.
3.1.2 Press the Power Button once to record video. The blue indicator light will
flash 3 times and then turn off.
3.1.3 Press the Power Button once again to stop video recording. The yellow
indicator light will stay illuminated, indicating the camera is back to standby mode.
3.1.4 Power off the camera by pressing the Power Button for 2 seconds. Both blue
and yellow indicator lights will flash once and then turn off.
[Note]:
1). A video clip will be generated and saved every 10 minutes automatically.
2).This pen camera can record video for 1 hourcontinuously on a full charge.
3).Video Resolution: 1920x1080P
Video Format: AVI
4). If the battery is low, the camera will save all video files and then shut down automatically. Both
blue and yellow indicator lights will flash alternately for 3 seconds and then turn off.
5). The camera will shut down automatically if it is in standby mode without any operation more