Wiseup P8000 Guia Del Usuario página 3

than 1 minute.
3.2. CAMERA/STILLPHOTOGRAPHY
3.2.1 Slide the Mode Switch to the position 1, power on the camera by pressing the
Power Button for 2 seconds, the yellow indicator light will flash and then turn off.
Press the power button once again to get into the standby mode, the yellow
indicator light will be solid on.
3.2.2 Press the Power Button once to take a photo. Every time you take a photo,
the blue indicator will flash once.
IV. Video/Image Files Uploads
4.1 Option 1: Direct Connection
4.1.1 Power off the camera, unscrew the pen to reveal a USBport.
4.1.2 Plug the pen directly into a proper PC computer USB port.
4.1.3 The pen camera will be recognized as a removable disk drive.
4.1.4 All the files can be accessed in the drive.
4.2 Option 2: Using a Card Reader
4.2.1 Power off the camera, unscrew the pen to reveal a USB port, remove the
Micro SD card from the Micro SD card slot, and then insert it into a card reader.
4.2.2 Insert the card reader into a proper PC computer USB port.
4.2.3 The Micro SD card will be recognized as a removable disk drive.
4.2.4 All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1 Power offthe camera, unscrew the pen to reveal a USB port.
5.2 Plug the pen directly into a proper PC computer USB port.
5.3 Removable disk drive folder appears.
5.4 Click on the drive in the root directory and inside the root directory, open the txt
file named "time.txt". If you can't find it, you could create a txt file named "time.txt".
5.5. Write the current date and time in the "time.txt" file with the correct format:
YYYY-MM-DD HH:MM:SS Y (For example: 2016-04-12 14:24:32 Y). Save this file.