ShelterLogic Pop-Up Pro Serie Instrucciones De Montaje página 3

Step 1:
Do not place hands between frame tubes.
Step 3:
Push up until canopy is fully opened.
Slide legs to desired height, making
Step 5:
sure buttons snap into place.
CAUTION:
for permanent installation. Never leave canopy unattended.
For all PRO SERIES
square and straight when temporary spike anchors are
For assembly questions, Please call Customer Support:
Remove assembly
from portable, wheeled
storage bag. Grab corner
legs in each hand. Lift
frame slightly off ground.
Stepping backwards, pull
frame apart until your
arms are fully extended.
Temporary spike anchors are NOT designed
™
inserted through corner feet.
1-800-524-9970 or in CANADA: 1-800-559-6175
Step 2:
Step 4:
Corner of
shelter
Step 6:
straight leg Pop-Ups, legs should be
Page 3
Unfold cover. Place
cover over frame. Align
corner pockets of cover
over frame legs.
At the four corners slide the corner slide up
until the button "pops" into place as shown.
When this is done pull the cover corners
down snugly and smoothly. Lift the valance
over the middle legs and insert the tension
hook in the anchor hole. Wrap theT over the
cross bar and pull the elastic loop under the
cross bar. Insert the T thru the elastic loop
to secure the valence.
For temporary anchoring of canopy on
grass, dirt or packed soil, insert temporary
spike anchors through corner feet.
05-22550-22551-22552-
22553-22554-22555-22599-0C
anChor