Hardware Installation - Steren COM-842 Manual De Instrucciones

2. HARDWARE INSTALLATION

You must install the PCI card inside of your computer. Make sure you have
the enough knowledge configuring and installing components on computers,
otherwise go with a technician.
1.- Unplug the power cord from your computer and any other connected peripheral
devices. Follow the precautions for static electricity discharge.
2. Remove the computer's cover.
3. Select an available PCI slot for the new board.
4. Remove the selected slot bracket by unscrewing the holding screw, slide it out
and place the PCI card, carefully align the board's bus connector with the selected
expansion slot on the motherboard. Push the board down firmly, but gently, until it is
well seated.
5. Place the computer's cover and plug all your peripheral devices.
4