Ferroli VF Serie Instrucciones De Montaje página 29

VF
1 - Open the triangle as shown in the figure.
H = 1030mm
H = 1320mm
H = 1520mm
A
20 N/m
B
B
20 N/m
3 - Fit the supporting structures already previously preassembled and
fix them to the triangles with the M12X20 hex. socket screws as
shown in figures A-B.
1
H
ß = 35°
ß = 45°
ß = 55°
3
A
Cod. 3540S892 - 01/2010 (Rev. 00)
A
10 N/m
B
10 N/m
2 - Choose the required support angle (see diagram above) and fix the
section L=995 to the support triangle as shown in figures A-B.
Make sure not to exceed an angle of 90° with the vertical profile.
=
=
IMPORTANT:
The top and bottom supporting bars must be fitted parallel and in a
completely straight way.
See page 11 for the arrangement and number of triangles.
2
A
L=995
B
MAX 90°
NO
=
=
29
EN