Important Safety Instructions
1.
Please read these instructions and then keep them safely for future reference.
2. Heed all warnings and follow all instructions in this manual.
3. Do not use this product near water, or where it may become wet.
4. Only clean this product with a dry, lint-free cloth.
5. Do not block any vents, and only install in accordance with the manufacturer's instructions.
6. Do not use this product near to any heat sources such as radiators, heaters, cookers or other devices (including amplifiers)
that produce heat.
7 .
Protect all cables from damage by avoiding sharp objects, bending around tight corners, and from friction or crushing damage
caused for example by walking on them.
8. Use only attachments or accessories as specified by the manufacturer.
9.
Unplug this product during lightning storms or in prolonged periods of disuse
10. Refer all servicing to qualified persons. Servicing may be required when the product has been damaged in any way,
does not operate normally or has been dropped.
11. Do not install this product in a confined or built-in space such as a bookcase or similar unit.
12. WARNING: Please refer to the information on the safety labels on the product or it's power supply before installing or operating
the device.
13. WARNING: To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. The product should
not be exposed to dripping or splashing and objects filled with liquids should not be placed on the product.
14. CAUTION: This product contains a Lithium battery. Incorrect disposal of this battery may result in explosion.
15. The recommended operating temperature range for this product is 5–40 degrees Celsius.
English
FCC Regulations
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules.
AC/DC Adapter with the ferrite ring must be used with this unit to ensure compliance with the Class B FCC limits.
Recycling
This product CAN be recycled. Products bearing this symbol
end of the products life, take it to a collection point designated for recycling of electronic devices. Find out more about return and
collection points through your local authority.
must NOT be thrown away with normal household waste. At the
English