Optional Kits; Power Supply; Connections - DAYCO TENSIOMETER Manual Usuario

DAYCOTENSIOMETER

Optional KITS:

KIT OPTION A:
Battery charger / 2 batteries / power supply 220V
KIT OPTION B:
Mains power supply 220V/240V

2.1. Power supply

DAYCO TENSIOMETER is powered via the power supply cable connected to the vehicle
battery.
Alternatively, it can be powered using either option A or option B kits.

2.2 Connections

Caution
Make sure that the equipment is disconnected before attempting to make
the connections described below
Connect the power supply cable to the instrument. During the connection, the con-
nector sliding armour moves to lock the connector.
To remove the connector, pull the sliding armour. The connector will disconnect
automatically.
19