Kohler K-T6808 Guía De Instalación Y Cuidado página 3

1/2" Nipple
4-7/8" (124 mm) Spout
7/16" (11 mm)
Apply plumbers putty.
1. Install the Spout
Remove the temporary nipple from the bath elbow.
Apply thread sealant to a 1/2" NPT nipple and install it to the
bath elbow so it extends 11/16" (17 mm) beyond the finished
wall.
Apply a bead of plumbers putty around the inlet end of the spout
according to the manufacturer's instructions.
Apply thread sealant to the nipple, and install the spout to the
nipple.
Carefully tighten with a clean strap wrench.
Remove excess putty.
Kohler Co. 3 1088008-2-C