For Battery Tools; Cleaning The Tool - Hyper Tough HT19-401-003-03 Manual Del Operador

The ambient temperature range for the use and storage of tool and battery is 0°C-45°C.
The recommended ambient temperature range for the charging system during charging is 0°C-40°C.
Clean the tool regu'larly.
WARNING! Keep your product dry. Under no circumstances spray with water.
- To clean the tool, use only mild soap and a damp cloth.
- Do not use any type of detergent, cleaner or solvent which may contain chemicals that could seriously
damage the plastic.
- Self lubricating bearings are used in your product, therefore lubrication is not required.
FCC Part 15
Supplier's Declaration of Conformity
Product Description : Charger
Model Number : HT19-401-003-14
Trade Name :
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Responsible Party :
Positec USA, Inc.
10130 Perimeter Parkway, Charlotte, NC 28216 USA
Tel.: (704) 599-3711
Fax: (704) 599-6390
Positec Machinery (China) Co., Ltd
461,East Ganjiang Road, Suzhou, Jiangsu 215006, P.R.China
'

FOR BATTERY TOOLS

CLEANING THE TOOL

18