3. Instructions for use
3.1. Before use:
3.1.1. Remove the appliance's protective film(if
applicable).
3.1.2. Before using the product for the first time,
clean the parts that will come into contact with
food in the manner described in the cleaning
section.
3.2. Use and care:
3.2.1. Operation
3.2.1.1. Untoll the power cord completely before
plugging it in.
3.2.1.2. Connect the appliance to the wall socket.
3.2.1.3. Place the juice receptacle at the juice
delivery tube.
3.2.1.4. Start the appliance; turn the speed selec-
tion dial to the desired speed.
3.2.1.5. Add the fruit or vegetables through the
loading tube.
3.2.1.6. Gently push the food pusher accesory.
3.2.1.7. The juice residue will be seperated
automatically: the juice will go towards the juice
receptacle and the residue will go to the pulp
container.
ATTENTION: If the locking handle is not properly
fitted the applaince will not start.
N.B. If you process a large quantity of fruit, you
must periodically clean the filter and remove
the remains of the pulp.
3.2.2 Operation time
After operating for 30 seconds, stop for 1 minute,
then use again. After the above operation is
performed three times, stop use for 15 minutes.
This way the service life of the appliance will be
prolonged.
3.3 Once you have finished using the appliance:
3.3.1. Leave the motor on for a few seconds al-
lowing the juice to be completely squeezed out.
3.3.2. Stop the appliance, selecting the "0" on the
speed selection dial.
3.3.3. Unplug the appliance from the wall socket.
3.3.4. Clean the appliance as described in the
cleaning section.