USER'S MANUAL
Product information
A: Power indicator
B: System indicator: steady=modem ready /
flashing= modem start-up
C: LAN activity indicator: steady=PC connected
/ flashing=data transfer
D: ADSL sync indicator: Steady=ADSL-OK /
flashing=connecting
E: PPP indicator; only lights when connected
thrue PPPoA/PPPoE
Installation
Connect the phone line, phone and ADSL modem to ADSL splitter box. Connect PC to ADSL modem.
Note: Splitter not included. For exact details on how to install your ADSL line check with Internet
1
Service Provider
2
Connect power adapter (L) to connection (I)
3
Power on PC
4
Modem will power on. Power, System, LAN and ADSL indicators lid
Open Internet explorer.
5
If Internet appears then: installation finished ready for use
If no Internet then: go to 6
Configuration (only when no Internet at step 4)
6
Place Trust manual CD-ROM
Click' 'ISP setting list'
7
Check if your ISP is listed and use the settings further on in the configuration process
Note: If your provider is not listed then contact your ISP to request the correct settings
8
Type:
http://192.168.1.1
1. Type username admin and password admin
9
2. Click 'OK'
10
Click 'Quick start'
11
Click 'RUN WIZARD'
12
Click 'Next'
1. Specify a new username and password to enter into the modem configuration menu
13
2. Click 'Next'
Note: this is not the username and password from your Internet account
1. Select your time zone
14
2. Click 'Next'
15
1. Select Internet connection type (protocol)
F: ADSL line connection
G: LAN (PC) connection
H: Reset button
I: Power adapter connection
J: ADSL cable
K: Network cable (Cable to PC)
L: Power adapter
[press Enter]
1
UK