installation instructions
1. Remove the old shower head leaving
shower arm.
2. Screw Anti-Siphon Device (A) into
existing shower head.
3. Place rubber gasket (included) into
Rotator Joint (B) and screw Rotator
Joint into the other end of the Anti-
Siphon Device.
4. Locate the end of the hose that has
a bolt on the end and screw it onto the
Rotator Joint (B).
5. Screw the other end of hose into the
new shower head (C).
6. Hang shower head on bracket end of
Anti-Siphon Device (A) when
not in use.
Item # 12045
Anti-Siphon Device
A
Shower Head
C
Existing Shower Head
Escutcheon
B