Tabla de contenido
Publicidad
ENGLISH
INSTRUCTIONS FOR CHARGING
1.
Always ensure that your hands, Cleansing Brush and charging adaptor are dry before
charging.
2.
Before using for the first time, fully charge the Cleansing Brush. One full charge will take
6 hours.
3.
Ensure the appliance is turned off.
4.
Insert the charging adaptor into the power inlet. Fig. 1.
5.
Plug the adaptor into the wall socket.
6.
The LED Indicator Light will illuminate whilst the Cleansing Brush is charging.
7.
When the Cleansing Brush is fully charged, the LED Indicator Light will switch off.
8.
One full charge will take 6 hours.
9.
One full charge allows up to 30 minutes of cordless usage time (30 x 1 minuses).
•
NOTE: If the battery charge is low, the LED Indicator Light will pulse on and off whilst in
use.
QUICK CHARGE FUNCTION
•
The Cleansing Brush is also equipped with a quick charge function.
•
To utilise this function, charge the Cleansing Brush for 5 minutes.
•
This will provide approximately 2-3 uses.
INSTRUCTIONS FOR USE
•
This product is suitable for wet use and may be used in the shower.
•
DO NOT submerge in water.
•
The adaptor cannot be used in a bath or shower.
•
The Cleansing Brush has 2 speed settings.
•
Always choose the speed setting which is most comfortable for you.
•
NOTE: If you suffer from sensitive skin, we recommend selecting speedsetting 1 for the
first few uses. If you do not experience any skin reactions then speed 2 may be used.
•
The Cleansing Brush also comes equipped with a one minute timer to help ensure
thorough cleansing of the whole face. We recommend cleansing in 3 sections: T-Zone (1),
Right side (2) and Left side (3). Fig. 2.
•
The Cleansing Brush will gently pulse every 20 seconds to indicate when to move to
the next zone.
•
The Cleansing Brush will automatically switch off after 60 seconds to indicate the end of
the brushing time.
•
NOTE: If you change speed settings during cleansing, the timer will set back to zero and
the timer will start again.
6
Publicidad
Tabla de contenido
