Dante Virtual Soundcard - Klark Teknik DN32-DANTE Guia De Inicio Rapido

22 KLARK TEKNIK DN32-DANTE
The Dante Controller must now be confi gured for "Slave to
External Word Clock" in this application. See the M32
line, which is confi gured Master in this example:
Renaming Dante Devices "Device View"
By default, the DN32-DANTE card may show up as "BKLYN-II-
06f732" in the controller app. The last six digits represent a part of
the card's Ethernet MAC address. However, the controller's Device
View allows assigning a more descriptive name to the network
device, see example below.
7. Audinate Software Tools
Dante Controller
The Dante Controller is a software application provided by
Audinate which allows users to confi gure and route audio
around Dante networks. It is available for PCs running Windows
and Apple Macs running OSX 10.5. Dante Controller must be
installed on one or more PC/Mac computers on the Dante
network in order to change any signal routing or clocking in the
network. Dante Controller is not required, when everything is
pre-confi gured, for running audio between Dante devices over
the network.

Dante Virtual Soundcard

The Dante Virtual Soundcard is a software application that turns
your PC or Mac into a Dante-enabled device, allowing Dante audio
traffi c to be transmitted and received using the standard Ethernet
port. No additional hardware is required. On Windows, the Dante
Virtual Soundcard uses Steinberg's ASIO audio interface, and can
be used with any audio application that supports ASIO or WDM.
On Mac OSX, the Dante Virtual Soundcard uses the standard
Core Audio interface, and can be used by almost any standard
audio application.
Visit audinate.com for further advice on downloading and
licensing these applications.
Specifi cations
Connectors
RJ45, Gigabit Ethernet 1 GBit/s,
'PRIMARY' and 'SECONDARY'
Input/Output Characteristics
Input / Output channels
Sample rates
Sample word length
Clock synchronisation, onboard high-quality
Dante network clock, based upon IEEE1588
PTP (precision time control)
System audio latency depends on Dante Controller
network confi guration
Dual-input Gigabit Ethernet ports
Indicator
Ethernet Link, LED indicator in socket,
fl ashes with network activity
1 Gbit/s Ethernet Link, LED indicator in socket
System Requirements
PC Hardware, minimum
Wired Ethernet interface
Windows applications, *recommended
(ASIO and WDM audio device interface)
Mac OSX applications
(Intel CPU only, no PPC support, CoreAudio)
Audinate is a registered trademark of Audinate Pty Ltd. Dante is a trademark of Audinate Pty Ltd. Mac is a trademark of Apple Inc. Windows is a registered trademark of
Microsoft Corporation in the United States in other countries. All other trademarks are the property of their respective owners. Audinate products are protected by one or
more of US Patents 7747725, 8005939, 7978696, 8171152 and other patents pending or issued, see www.audinate.com/patents.
Quick Start Guide
2
32 / 32
44.1 kHz / 48 kHz
24-Bit PCM
Console 'Local'
or
Dante network clock 'DN32-DANTE'
0.25 ms, 0.5 ms,
1 ms or 5 ms
Ethernet Switch Mode or
Dante Redundancy Mode
2 LED, green
2 LED, amber
Dante Controller App Dante Virtual Soundcard
CPU Dual Core
CPU 1 GHz RAM 1 GB
RAM 512 MB Wired Ethernet interface,
Display 1024 x 768 1 GB/s required for channel
counts higher than 32 x 32
@ 48 kHz
XP SP3 32-Bit
Win7 32-/64-Bit
*Win7 32-/64-Bit
Win8 32-/64-Bit
Win8 32-/64-Bit
Mac OSX 10.6.8, Mac OSX 10.5, 10.6.8,
10.7.5, 10.8, 10.9 10.7.5, 10.8, 10.9
23