Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
14
KLARK TEKNIK DN32-DANTE
3. Requirements
Minimum hardware:
Windows-based
- Core 2 Duo CPU, 2 GHz
application
- Ethernet port
- 1 GB RAM
Mac
- 1.5 GHz CPU
- Ethernet port
- 512 MB RAM
4. Connector Plate
• •
2x RJ45 connectors with integrated LEDs
• •
ACT/LINK LED (green) lights green when valid IP network
connection exists.
• •
1 G LED (amber) lights when used in 1 GBit/s network.
• •
2x small handles (St) for removing the expansion card from
the slot
• •
2x outer screws for fi xing the card in the slot (M3 x 6 size).
• •
3x countersunk screws fi xing the PCBA to the bracket.
Do not remove these!
Recommended Operating Systems:
Windows:
Windows Windows 7 32-bit or 64-bit,
Windows 8 32-bit or 64-bit
Mac:
10.6.8 Snow Leopard, 10.7.5 Lion,
10.8 Mountain Lion
Dante Controller application provided free of charge at
audinate.com.
Dante Virtual Soundcard application optional at audinate.com.
5. Connection Scenarios
5.1 M32 with DN32-DANTE connection to
Dante
TM
network
M32 ➝ network router
➝ PC and other Dante-enabled audio
1
devices, e.g. generic digtal console with Dante card
1
for advice on suitable network routers for use with Dante networks visit audinate.com
Here the PC performs 3 tasks concurrently:
a)
run Dante Controller app for signal routing
b)
run X32-Edit app, for M32 remote control
c)
run Dante Virtual Soundcard, DVS, for recording/playback of
all audio channels of both mixers
MIDAS M32
Secondary
Primary
Quick Start Guide
Laptop
Router/Switch
Digital mixer with Dante card
15
Publicidad
Tabla de contenido
