Pc Camera; Camera App; Power Options - ONE K56-5M Manual Del Usuario

PC Camera

Use the Fn + F10 key combination to toggle power to the
PC Camera module. When the PC Camera is in use the PC
Camera LED will be illuminated (see

Camera App

Note that you need to use the Camera app
dows to take pictures and capture video.
1. Run the Camera app from the Start menu by clicking on the
Camera app icon in All Apps (you can type "camera" into
the search box to find the Camera app if it is not pinned to the
Start menu).
2. Click to select either photo
3. Click the photo icon to take a picture, and the icon will
briefly turn yellow as the picture is taken.
4. Click on the video icon
capture begins a timer will appear at the bottom of the screen
and the icon will turn yellow).
5. To stop video capture click the video icon again.
6. Captured photos and videos will be saved to a Camera Roll
folder within the Pictures folder in This PC, and to the Photos
app stored in the Start menu.
page 8).
in Win-
or video mode.
to start video capture (if video

Power Options

The Power Options (Hardware and Sound menu) con-
trol panel icon in Windows allows you to configure power
management features for your computer. You can con-
serve power by means of power plans and configure the
options for the power button, sleep button (Fn + F12),
computer lid (when closed), display and sleep mode (the
default power saving state) from the left menu. Note that
the Power saver plan may have an affect on computer
performance.
Click to select one of the existing plans, or click Create a
power plan in the left menu and select the options to cre-
ate a new plan. Click Change Plan Settings and click
Change advanced power settings to access further con-
figuration options.
Figure 25 - Power Options
29